Schüco


 

Schüco SMAU-1 Series

The SMAU-1 series of Schüco PV modules are distinguished by monocrystalline solar cells with a cell efficiency of up to 17 % for high outputs per square meter of module area. The output tolerance of an SMAU-1 module is +3 / -3 %, only modules of the highest quality provide this level of reliability.
 

Schüco MPE modules in the MS 05 series

Schüco MPE modules in the PS 05 Series are assuring high-powered, reliable performance for solar projects both on- and off-grid. Each PV cell features anti-reflective coatings, state-of-the-art silver front contacts, and full-coverage aluminum back contacts with a back surface field. Schüco’s PV cells are meticulously manufactured in accordance with the highest technical standards, ensuring excellence at every stage of the production process and resulting in highly efficient, long-life cells.

Schüco MPE modules in the PS 09 series

Schüco MPE modules in the PS 09 Series are distinguished by polycrystalline solar cells with high cell efficiencies for the highest possible outputs per square meter of module area. The output tolerance of -0%/+5% ensures the highest quality and means increases outputs due to a guaranteed rated output for each module.

Warranty: 5-year product warranty and 25-year power output warranty (90% 12 years; 80% 25 years)

 

Schüco MPE modules in the AL 01 series

Innovative thin-film laminates – Schüco MPE modules in the AL 01 series are characterized by their impressive performance and their high fabrication quality: the amorphous cell technology allows optimum power output at high operating temperatures, with diffuse light or non-optimum module orientation. This ensures maximum annual outputs. Due to the positive output tolerance of +5/-0 Wp, the rated output is always achieved or exceeded.

Environmental protection – Only small quantities of raw materials are needed to produce Schüco MPE thin-film modules in the AL 01 series, and the modules do not contain cadmium or lead. The energy payback period is approximately 1.5 years.

 

 

Schüco ezFlatRoof 4.0

The optimum flat-roof with east/west alignment solution – The Schüco ezFlatRoof 4.0 mounting system is the ideal solution for a variety of flat roofs – without ballast load and with only five installation components. The east / west alignment of Schüco thin-film modules in the AL series at an angle of just 10° allows for use of up to 90 % of the net roof area, without the need to penetrate the roof covering.

Module pairs act as a closed system of forces and mount quickly – Two modules on opposite sides form a roof-like structural unit by means of traction cables and brackets which are inserted into the rear struts. Fixed to loose cable routes, the rows of modules are ballast-free and structurally secure. The small number of different components and the flat mounting frames allow for extremely fast installation.
 

   
Other PV Modules: Sanyo

 

    (Pictures coming soon)